REMAP INSTRUCTIONS
PLAYSTATION 5
1) Hold L1, L2, R1, R2 for around 7 seconds, the little mic mute button in between the 2 analogue sticks will light up for 1 second.
2) Hold the rear button you want to remap, and tap the button you want to set it to. (For example, while holding the Right rear button, tap triangle. The LED will blink to show you it's been set) do this for all rear buttons.
3) When you are happy with the setup of the rear buttons, press UP on the D-Pad. The LED will light up for 1 second to show you the controller is out of remap mode.
XBOX SERIES X/S
1) To Enter the programming mode HOLD RT + RB + LT + LB for 8 seconds, the LED XBOX home button will make one long flash.
2) To Configure a rear button for standard button remapping, press and hold a rear button, while holding tap any button you would like to assign, this can be multiple buttons if you like.
• Example 1: Hold rear button, tap Y, release rear button. When the rear button is pressed, Y will be pressed on the controller.
• Example 2 : Hold rear button, tap X, tap RT, tap UP on D-pad, release rear button. When the rear button is pressed, X, RT and UP are all pressed on the controller at the same time.
3) To exit the programming mode and save your configuration just tap the VIEW Button.